The CALB L173F178A delivers 178 Ah and 560.7 Wh per cell at 1C discharge, with a rated voltage of 3.15 V under the same test condition.
Under the standard 1/3C discharge test at 25 ± 2°C, the cell delivers 180 Ah and 579.6 Wh.
The aluminum housing features blue PET side insulation and a specified thickness of 36.4 mm, supporting space-efficient module layouts.
The L173F178A is an individual cell for traction battery modules and custom battery packs. A cell ID on the top cover supports traceability during assembly.
| Item | Parameter | Test Condition / Note |
|---|---|---|
| Model | CALB L173F178A | Rechargeable prismatic lithium-ion cell |
| Rated Capacity | 178 Ah | At 1C discharge |
| Rated Voltage | 3.15 V | At 1C discharge |
| Rated Energy | 560.7 Wh | At 1C discharge |
| Standard Discharge Performance | 180 Ah / 3.22 V / 579.6 Wh | 1/3C discharge at 25 ± 2°C |
| Dimensions (W × T × H) | 174.4 ± 0.3 × 36.4 ± 0.15 × 220.0 ± 0.3 mm | Height includes terminals. Thickness measured at 20% SOC under a load of 300 ± 20 kgf. |
| Body Height | 217.3 ± 0.4 mm | Excluding terminals |
| Cell Weight | 3.15 ± 0.08 kg | Per cell |
| Gravimetric Energy Density | 184 Wh/kg | Under standard discharge conditions |
| AC Internal Resistance | 0.2–0.4 mΩ | At 20% SOC, room temperature and 1 kHz |
| Operating Voltage Range | 2.5–3.65 V | Above 0°C through 65°C |
| Standard Charge | 1/3C CC/CV to 3.65 V | At 25 ± 2°C; charge ends when current falls below 0.05C |
| Standard Discharge | 1/3C to 2.5 V | At 25 ± 2°C |
| Operating Temperature | Charging: −20°C to 65°C Discharging: −30°C to 65°C |
Subject to the manufacturer's temperature-dependent current and voltage limits |
| Recommended Storage Conditions | 5°C to 40°C | Dry, clean and ventilated storage; 20–25% SOC for long-term storage |
Note: The 1C ratings and standard 1/3C discharge results are based on different test conditions. Confirm the approved specification, terminal configuration and operating limits for the supplied batch before finalizing module or pack design.
Available with welding or nut terminals to suit various installation needs
The label shown on the battery cell is for visual demonstration only. The actual product will usually not have this label, only the essential numbering or identification.
Due to its unique properties, our LFP battery cell is widely used in fields requiring ultra-high power and long life:
Meets the fast charge and discharge needs of buses for rapid energy replenishment.
Used for grid peak shaving and frequency regulation to enhance stability.
Efficiently integrates wind and solar energy to ensure a stable power supply.
Provides efficient energy for automated equipment and mobile robots.
Our products undergo strict testing and comply with multiple international standards to ensure quality and safety.
*Certification status may vary depending on region or project requirements. Relevant test reports or assistance for market-specific certification can be provided upon request.
